Volume 18 | Mekhanika | kompozitsionnykh | materialov i konstruktsii
About the buckling of the elastic circular cylindrical shell under torsion
> Volume 18 > №1 / 2012 / Pages: 3-15
About the buckling of the elastic circular cylindrical shell under torsion
> Volume 18 > №1 / 2012 / Pages: 3-15
The research of stress-strain state of dispersedly fiiled polymer composite using the 3d-models
> Volume 18 > №1 / 2012 / Pages: 16-34
Dynamic properties of films and layered sheet packages at cross-section wave compression
> Volume 18 > №1 / 2013 / Pages: 35-44
Kinematics of normal modes in elastic layer for some wavenumbers investigation based on n-th order three-dimensional shells’ theory
> Volume 18 > №1 / 2012 / Pages: 35-44
Dynamic properties of films and layered sheet packages at cross-section wave compression
> Volume 18 > №1 / 2012 / Pages: 35-44
Kinematics of normal modes in elastic layer for some wavenumbers investigation based on n-th order three-dimensional shells’ theory
> Volume 18 > №1 / 2012 / Pages: 45-56
The effect of the axial force on the frequency of axial vibration of lattice composite payload attach fitting
> Volume 18 > №1 / 2013 / Pages: 57-62
The effect of the axial force on the frequency of axial vibration of lattice composite payload attach fitting
> Volume 18 > №1 / 2012 / Pages: 57-62
Chanel widths dependance of integral characteristics of the stationary plane-prallel polymeric fluds flows
> Volume 18 > №1 / 2012 / Pages: 63-72
Chanel widths dependance of integral characteristics of the stationary plane-prallel polymeric fluds flows
> Volume 18 > №1 / 2012 / Pages: 63-72
Preparation and physical and mechanical properties of interpolymer compounds of polyanilines and polсapromids with additionat bentonit nuroto
> Volume 18 > №1 / 2012 / Pages: 73-82
Preparation and physical and mechanical properties of interpolymer compounds of polyanilines and polсapromids with additionat bentonit nuroto
> Volume 18 > №1 / 2012 / Pages: 73-82
On estimation of fracture parameters for interlaminar shear cracks in layered composites
> Volume 18 > №1 / 2012 / Pages: 83-91
On estimation of fracture parameters for interlaminar shear cracks in layered composites
> Volume 18 > №1 / 2012 / Pages: 83-91
Asymptotic homogenization of the brinkman filtration equations in multiphase media with periodic structure
> Volume 18 > №1 / 2012 / Pages: 92-110
Asymptotic homogenization of the brinkman filtration equations in multiphase media with periodic structure
> Volume 18 > №1 / 2012 / Pages: 92-110
Identification of heat transfer tensor components for anisotropic composites
> Volume 18 > №1 / 2012 / Pages: 111-120
Identification of heat transfer tensor components for anisotropic composites
> Volume 18 > №1 / 2012 / Pages: 111-120
Continuum and discrete models of lattice composite cylindrical shells
> Volume 18 > №1 / 2012 / Pages: 121-130
Continuum and discrete models of lattice composite cylindrical shells
> Volume 18 > №1 / 2012 / Pages: 121-130
The geometry of carbon nanotubes at medium of polymer composites matrix
> Volume 18 > №1 / 2012 / Pages: 131-153
Influence of curvature of layers on factors of electromagnetic connection for piezocomposite
> Volume 18 > №2 / 2012 / Pages: 155-168
The influence of lьders front propagation on the strength of the “coating–base material” composition. Numerical simulation
> Volume 18 > №2 / 2012 / Pages: 169-189
Estimation of fragments forming at penetration of periodic system of strings into a massive wall
> Volume 18 > №2 / 2012 / Pages: 190-212
Fracture model of weldments under delamination
> Volume 18 > №2 / 2012 / Pages: 213-225
On the competition of the processes of shift deformation and volumetric compacting of cermet materials with the SHS-extrusion
> Volume 18 > №2 / 2012 / Pages: 226-234
Straining circular cylinder from shape memory alloy at direct phase transition or martensite inelastisity
> Volume 18 > №2 / 2012 / Pages: 235-247
Investigation of stress-strain state in beams with reinforcing carboplastic layer
> Volume 18 > №2 / 2012 / Pages: 248-254
Buckling of the column with the bent butts
> Volume 18 > №2 / 2012 / Pages: 255-266
Energy-power criterions by composite superconducting products deformation
> Volume 18 > №2 / 2012 / Pages: 255-266
Electrorheological properties of suspensions on the basis of polyimides nanoparticles
> Volume 18 > №2 / 2012 / Pages: 273-300
An analysis of the established creep of reinforced metalocomposite wall-beams in view of the weakened resistance to in-plane shear
> Volume 18 > №3 / 2012 / Pages: 301-319
Buckling and strength of skew plates
> Volume 18 > №3 / 2012 / Pages: 320-324
3D velocity profile modeling of nonlinear viscoelastic fluid flow in the channel with square section
> Volume 18 > №3 / 2012 / Pages: 325-332
A formulation of the three-dimensional approximated shells theory of n-th order using generalized displacements and its application to steady dynamics
> Volume 18 > №3 / 2012 / Pages: 333-344
Electro-magnetic and elastic fields, effective properties of piezocomposites with quasiperiodic structures
> Volume 18 > №3 / 2012 / Pages: 345-358
Al-SiC based metal matrix composites for power electronic devises
> Volume 18 > №3 / 2012 / Pages: 359-368
Kinematic model of the non-newtonian rheological fluids in non-stationary cyclic loading
> Volume 18 > №3 / 2012 / Pages: 369-383
Stability of rigid beem with viscous plastic pin joint
> Volume 18 > №3 / 2012 / Pages: 384-399
On the shock waves structure in anisotropic carbon fiber-epoxy composites with micro- and macrofractures
> Volume 18 > №3 / 2012 / Pages: 400-413
Influence of magnetic treatment of polymer adhesive on the strength of adhesive compounds on their basis
> Volume 18 > №3 / 2012 / Pages: 414-421
Application of graph theory to find the optimal trajectory of the spreading mechanism of winding machine
> Volume 18 > №3 / 2012 / Pages: 422-433
Mechanical strength of temporary fixed dental prostheses
> Volume 18 > №3 / 2012 / Pages: 434-439
Gradient model of thermoelasticity and its application for the modelling of thin layered structures
> Volume 18 > №3 / 2012 / Pages: 440-449
A model of damage accumulation in an artificial human locomotor system
> Volume 18 > №4 / 2012 / Pages: 451-462
Three-level model of shape memory alloy with application to reversing shape memory effect simulation
> Volume 18 > №4 / 2012 / Pages: 463-474
Some engineering evaluations for accuracy in finite element solutions in the theory of cylindrical composite shells
> Volume 18 > №4 / 2012 / Pages: 475-485
Aeroelastic stability of rotating anisotropic blade of a helicopter rotor in hover
> Volume 18 > №4 / 2012 / Pages: 486-496
Some possibilities of regulation of the mechanical response of the combined polymeric threads on high-speed wave loading
> Volume 18 > №4 / 2012 / Pages: 497-507
Appendix to model of porous materials deformation for calculation of plastic properties of granular composite
> Volume 18 > №4 / 2012 / Pages: 508-526
Orthotropic plate’s response to broadband acoustic excitations at different types of cross spectral density of loads
> Volume 18 > №4 / 2012 / Pages: 527-542
The modified takanayga model of deformation for dispersed-filled composites
> Volume 18 > №4 / 2012 / Pages: 543-551
The stress-strain state features of the helicopter blade butt
> Volume 18 > №4 / 2012 / Pages: 552-561
On the finite-element approach to modeling the flexible rod systems at finite deformations
> Volume 18 > №4 / 2012 / Pages: 562-579
Application of identification method for integral models of viscoelastic media on non-linear “damping-function” base
> Volume 18 > №4 / 2012 / Pages: 580-594