Volume 13 | Mekhanika | kompozitsionnykh | materialov i konstruktsii
Determination of the effective physical and mechanical properties of the hybrid composites reinforced cross transversely isotropic fibers, and a comparison of the characteristics of the calculated and experimental data
> Volume 13 / 2007 / Pages: 3-32
Analysis of the theoretical strength of interfacial layers of the adsorption complexes of polymeric composite media
> Volume 13 > №1 / 2007 / Pages: 33-41
Large deformation of the axial shear and torsion of homogeneous coaxial cylinders and reinforced threads
> Volume 13 / 2007 / Pages: 42-56
The destruction of brittle materials under repeated impact loading
> Volume 13 > №1 / 2007 / Pages: 57-70
Influence dilaton processes on the formation of the mechanical response parameters of unidirectional composites with high pulse loads
> Volume 13 > №1 / 2007 / Pages: 71-78
Effective fluid shear modulus and its dependence on the degree of surface wettability piezoquartz
> Volume 13 > №1 / 2007 / Pages: 79-85
Using a dynamic analyzer RPA2000 polymers for rapid assessment of elastic-hysteresis characteristics of dynamic thermoplastic elastomers
> Volume 13 > №1 / 2007 / Pages: 86-96
Prediction of structural strength of unidirectionally reinforced fiberglass rods
> Volume 13 > №1 / 2007 / Pages: 97-112
Effect of molecular weight of suspension PVC for durability plasticized composition
> Volume 13 > №1 / 2007 / Pages: 113-118
Diffraction unsteady acoustic wave on an inhomogeneous transversely-isotropic hollow sphere
> Volume 13 / 2007 / Pages: 119-130
Numerical simulation of the forward and reverse reactions in the rods and plates made of a shape memory alloy
> Volume 13 > №1 / 2007 / Pages: 131-140
Stability of a rectangular plate of shape memory alloy in shear
> Volume 13 / 2007 / Pages: 141-152
The study mixed problems of bending of a circular cylinder using Lurie-making Vorovich
> Volume 13 / 2007 / Pages: 153-164
Deformation representative cell film-fabric composite under finite displacements
> Volume 13 / 2007 / Pages: 165-175
Identification of composite materials
> Volume 13 / 2007 / Pages: 174-182
Structural aspects of the formation of a critical defect in the polymer dispersion-filled composites
> Volume 13 > №2 / 2007 / Pages: 183-190
Some structural model for describing the rheological properties of materials
> Volume 13 > №2 / 2007 / Pages: 191-208
Determination of the strength characteristics of heterogeneous media
> Volume 13 / 2007 / Pages: 209-218
Modelling of heat and mass transfer in anisotropic composite materials
> Volume 13 > №3 / 2007 / Pages: 219-232
The destruction of the coating on the plates with a cutout
> Volume 13 > №2 / 2007 / Pages: 233-238
Research on the strength of concrete columns explosive load by computer simulation
> Volume 13 > №2 / 2007 / Pages: 239-253
Comparative analysis of the influence of mechanical factors on bone loss prosthetic hip
> Volume 13 > №3 / 2007 / Pages: 254-264
Effect of stiffening frames on the stability of stiffened shell of polymeric composite materials
> Volume 13 / 2007 / Pages: 265-272
A study of flexible rectangular plates, supported by ribs of different stiffness along two opposite edges of the elastic limit
> Volume 13 / 2007 / Pages: 273-283
The associative model of viscoelastic media
> Volume 13 / 2007 / Pages: 284-296
Dimensional micromechanical model of nonlinear deformation of shape memory alloys for both forward and reverse thermoelastic transformations
> Volume 13 / 2007 / Pages: 297-322
The dependence of the dynamic characteristics of linear viscoelasticity multimodal polydisperse linear polymers melt frequency
> Volume 13 / 2007 / Pages: 323-330
Fractal assess amplification mechanism of polymer composites with carbon nanotubes
> Volume 13 / 2007 / Pages: 331-340
Model experiment, clarifying the mechanism of high fragmentation drummer discrete screens
> Volume 13 > №3 / 2007 / Pages: 341-355
A complete review on friction models of composite cables
> Volume 13 / 2007 / Pages: 356-384
Fluctuations of sound-absorbing perforated panel with the system tube-type cells
> Volume 13 > №3 / 2007 / Pages: 385-399
Structural modeling of the time dependence of elastomeric composites filled with nanoparticles
> Volume 13 > №3 / 2007 / Pages: 400-407
Stability of layered shell, supported by circular ribs and the cylinder with variable channel
> Volume 13 > №3 / 2007 / Pages: 408-416
viscoelastic body blow to an isotropic elastic plate
> Volume 13 > №3 / 2007 / Pages: 417-425
Investigation of strength and stability of unidirectional fiberglass rods under axial compression
> Volume 13 / 2007 / Pages: 426-440
Structural models of elasticity and creep unidirectional composite transverse shear
> Volume 13 / 2007 / Pages: 441-451
Solution of initial value problems of the direct and reverse transformation in the framework of the nonlinear theory of deformation of shape memory alloys
> Volume 13 / 2007 / Pages: 452-468
Application of FEM to analyze static and dynamic modes of multi-span sections of overhead lines
> Volume 13 / 2007 / Pages: 469-478
Structure and properties of dispersion-filled nanocomposites phenylone / aerosil
> Volume 13 > №4 / 2007 / Pages: 479-492
Expansions in functions Fadl-Papkovich mixed boundary value problems in the theory of elasticity
> Volume 13 > №4 / 2007 / Pages: 493-518
The theory of ideal adhesion interactions
> Volume 13 > №4 / 2007 / Pages: 519-536
The stresses in the laminated cores of variable section
> Volume 13 > №4 / 2007 / Pages: 537-547
The method of splitting the asymptotic in problems of the longitudinal-transverse bending of anisotropic laminated plates
> Volume 13 > №4 / 2007 / Pages: 548-580
The generalization of the Poiseuille’s law for plane-parallel flow of viscoelastic fluids
> Volume 13 > №4 / 2007 / Pages: 581-590
The effect of small temperature fluctuations on the curve pseudoelasticity shape memory alloys
> Volume 13 / 2007 / Pages: 591-599